front sprocket造句
例句与造句
- The engine drove front sprockets, which were mounted quite low.
- The tracks were driven through the front sprockets.
- The 1200 Bandits have 15 tooth front sprockets and 45 tooth rear sprockets connected by 530V, 110 link rear chains.
- It only geared up, so a relatively large rear sprocket was necessary to give a reasonable development when combined with a normal front sprocket.
- The front sprocket drive shaft was free to slide forward and backwards slightly, just enough to allow the roller to move away from the flywheel.
- It's difficult to find front sprocket in a sentence. 用front sprocket造句挺难的
- The Fazer is a well reviewed motorcycle that is generally considered reliable although many owners have reported problems caused by a weak front sprocket nut.
- The advantage of micro drive is that it means a smaller front sprocket, or chainring, can be used without affecting the gear ratio, providing better ground clearance.
- The chain drive, coupling a large front sprocket ( the pneumatic tires were developed and replaced the previously used solid ones, this disadvantage was no longer an issue.
- A bicycle is said to have perfect chainline if the chain is parallel to the frame, which means that the rear sprocket is directly behind the front sprocket.
- There may be larger ( number of teeth ) sizes available as well, either custom manufactured or adapted from chainwheels or front sprockets using a number of methods or devices.
- Now, consider the small and large front sprockets which have 28 and 52 teeth respectively, and consider the small and large rear sprockets which have 16 and 32 teeth each.
- To picture this, think of your bicycle, which shifts down to more teeth on the front sprocket, but can then also shift to more teeth on the back for extra torque.
- It has a primary reduction ratio of : 4.058, and a secondary reduction ratio of 2.6 via the chain drive ( 15 tooth front sprocket and 39 tooth rear sprocket ) . [ 1]
- The rear engine-front sprocket drive layout required a driveshaft to pass underneath the turret, which increased the overall height of the tank, a characteristic shared with German tanks of World War II that also used this layout.
- A roller ( a metal wheel with a rubber surface vulcanized to increase its grip ) on the front sprocket shaft was pressed against the machined rear surface of the engine flywheel, thus driving the sprocket shaft, the drive chains and the rear wheels.
更多例句： 下一页